Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
USB camera models, including Flex series cameras and V120:Duo/Trio tracking bars, are currently not supported in Motive 3.0.x versions. For those systems, please refer to the .
USB Cameras are currently not supported in 3.x versions of Motive. The USB camera pages on this wiki are purely for reference only, at this time.
The OptiTrack Duo/Trio tracking bars are factory calibrated and there is no need to calibrate the cameras to use the system. By default, the tracking volume is set at the center origin of the cameras and the axis are oriented so that Z-axis is forward, Y-axis is up, X-axis is left.
If you wish to change the location and orientation of the global axis, you can use the ground plane tools from the and use a Rigid Body or a calibration square to set the global origin.
Adjustig the Coordinate System Steps
[Motive] Open the Ground Planes page.
[Motive] Click Set Set Ground Plane button, and the global origin will be adjusted.
When using the Duo/Trio tracking bars, you can set the coordinate origin at the desired location and orientation using either a Rigid Body or a as a reference point. Using a calibration square will allow you to set the origin more accurately. You can also use a custom calibration square to set this.
First set place the calibration square at the desired origin. If you are using a Rigid Body, its position and orientation will be used as the reference.
[Motive] Open the .
[Motive] Select the type of calibration square that will be used as a reference to set the global origin. Set it to Auto if you are using a calibration square from us. If you are using a Rigid Body, select the Rigid Body option from the drop-down menu. If you are using a , you will need to set the vertical offset also.
[Motive] Select the Calibration square markers or the Rigid Body markers from the
