CinePuck

This page provides additional information for the CinePuck. The CinePuck is designed specifically for Virtual Production or Broadcast studios. For more information on how to use the CinePuck for Virtual Production, please visit the Virtual Production section of this documentation.

Active Markers

LED Specification

The following specification applies for active IR LEDs on the CinePuck.

• 850 nm IR spectrum.

• 8 LEDs

• Illuminations synchronized with camera exposures

• Illumination angle: ±60°

Basic Specs

Spec	Description
CinePuck Body Dimensions	Dimensions Width: 153.30mm (~6.04”) Length: 127.68mm(~5.03”) Height: 25.70(~1.01”)
Weight	11.58 oz (~328.29g)
Attachment	x1 ARRI-Style Anti-Twist Mount w/ 3/8"-16 threads x6 Standard Tripod Mounts w/ 1/4"-20 threads
Battery	2200mAh Lithium polymer battery Charging 5V micro USB Type C ~7.5 hours* of battery life (*Battery life varies depending on frame rate and exposure settings) 5hrs zero to full charge
IMU	Dimensions Width: 15mm Length: 15mm Height: 5.720mm Weight < 1.75g
Gyroscope	Dynamic Range 125 +/- °/sec

Calibration

For information regarding calibrating the IMU inside the CinePuck, please refer to our Active Marker Tracking: IMU Setup page.

You can also see a demonstration at around minute 4:20 in the video below also found on our InCamera VFX page